Treatment of industrial wastewaters by algae-bacterial consortium with Bio-H2 production: Recent updates, challenges and future prospects.

Currently, scarcity/security of clean water and energy resources are the most serious problems worldwide. Industries use large volume of ground water and a variety of chemicals to manufacture the products and discharge large volume of wastewater into environment, which causes severe impacts on environment and public health. Fossil fuels are considered as major energy resources for electricity and transportation sectors, which release large amount of CO2 and micro/macro pollutants, leading to cause the global warming and public health hazards. Therefore, algae-bacterial consortium (A-BC) may be eco-friendly, cost-effective and sustainable alternative way to treat the industrial wastewaters (IWWs) with Bio-H2 production. A-BC has potential to reduce the global warming and eutrophication. It also protects environment and public health as it converts toxic IWWs into non or less toxic (biomass). It also reduces 94%, 90% and 50% input costs of nutrients, freshwater and energy, respectively during IWWs treatment and Bio-H2 production. Most importantly, it produce sustainable alternative (Bio-H2) to replace use of fossil fuels and fill the world's energy demand in eco-friendly manner. Thus, this review paper provides a detailed knowledge on industrial wastewaters, their pollutants and toxic effects on water/soil/plant/humans and animals. It also provides an overview on A-BC, IWWs treatment, Bio-H2 production, fermentation process and its enhancement methods. Further, various molecular and analytical techniques are also discussed to characterize the A-BC structure, interactions, metabolites and Bio-H2 yield. The significance of A-BC, recent update, challenges and future prospects are also discussed.

Development of a simple biogas analyzer module (BAM) for real-time biogas production monitoring.

ABSTRACTAnaerobic digestion (AD) relies on the cooperation of specific microbial communities, making it susceptible to process disruptions that could impact biogas production. In this regard, this study presents a technological solution based on the Arduino platform, in the form of a simple online monitoring system that can track the produced biogas profile, named as biogas analyzer module (BAM). The applicability of the BAM focused on monitoring the biogas produced from sugarcane vinasse inoculated with sewage sludge biodigestion processed in mesophilic conditions (38 oC), in a pH range of 6.5-7.5, and following a three-stage operational model: (i) an adaptation (168 h), (ii) complete mixing (168 h), and (iii) bio-stimulation with glycerol (192 h). Then, the lab-made BAM was used to trace the produced biogas profile, which registered a total biogas volume of 8,719.86 cm3 and biomethane concentration of 95.79% (vol.), removing 90.8% (vol) of carbon dioxide (CO2) and 65.2% (vol) of hydrogen sulfide (H2S). In conclusion, the results ensured good accuracy and efficiency to the device created by comparisons with established standards (chromatographic and colorimetric methods), as well as the cost reduction. The developed device would likely be six times cheaper than what is available in the market.

Microalgae: A green eco-friendly agents for bioremediation of tannery wastewater with simultaneous production of value-added products.

Tannery wastewater (TWW) has high BOD, COD, TS and variety of pollutants like chromium, formaldehydes, biocides, oils, chlorophenols, detergents and phthalates etc. Besides these pollutants, TWW also rich source of nutrients like nitrogen, phosphorus, carbon and sulphur etc. that can be utilized by microalgae during their growth. Direct disposal of TWW into the environment may lead severe environmental and health threats, therefore it needs to be treated adequately. Microalgae are considered as an efficient microorganisms (fast growing, adaptability and strain robustness, high surface to volume ratio, energy saving) for remediation of wastewaters with simultaneous biomass recovery and generation of value-added products (VAPs) such as biofuels, biohydrogen, biopolymer, biofertilizer, pigments, bioethanol, bioactive compounds, nutraceutical etc. Most microalgae are photosynthetic and use CO2 and light energy to synthesise carbohydrate and reduces the emission of greenhouse gasses. Microalgae are also reported to remove heavy metals and antibiotics from wastewaters by bioaccumulation, biodegradation and biosorption. Microalgal treatment can be an alternative of conventional processes with generation of VAPs. The use of biotechnology in wastewater remediation with simultaneous generation of VAPs is trending. The validation of economic viability and environmental sustainability, life cycle assessment studies and techno-economic analysis is undergoing. Thus, in this review, the characteristics of TWW and microalgae are summarized, which manifest microalgae as potential candidates for wastewater remediation with simultaneous production of VAPs. Further, the treatment mechanisms, various factors (physical, chemical, mechanical and biological etc.) affecting treatment efficiency as well as challenges associated with microalgal remediation are also discussed.

Wastewater generation and treatment by various eco-friendly technologies: Possible health hazards and further reuse for environmental safety.

The discharge of untreated wastewater as a result of various developmental activities such as urbanization, industrialization and changes in lifestyle poses great threats to aquatic ecosystems as well as humans. Currently, ∼380 billion m3 (380 trillion liters) of wastewater is generated globally every year. Around 70% of freshwater withdrawals are used for agricultural production throughout the world. The wastewater generated through agricultural run-off further pollutes freshwater resources. However, only 24% of the total wastewater generated from households and industries is treated before its disposal in rivers or reused in agriculture. The most problematic contaminants associated with ecological toxicity are heavy metals such as Cd, Cr, Cu, Ni, Zn, Fe, Pb, Hg, As and Mn. One of the most important issues linked with wastewater generation is the residual presence of pathogenic microorganisms which pose potential health hazards to consumers when they enter into the food chain. It is estimated that in India almost USD 600 million (48.60 billion INR) is spent per year to tackle waterborne diseases (WBD). In light of this, immediate action is needed to effectively treat wastewater and develop safer reuse prospects. Various wastewater treatment technologies have been established and they work well to provide an alternative water source to meet the growing demand. The main concern towards treating wastewater is to eliminate inorganic and organic substances and lower the nutrient concentration, total solids, and microbial pathogens to prevent freshwater pollution and health risks.

Microbial fuel cell: A green eco-friendly agent for tannery wastewater treatment and simultaneous bioelectricity/power generation.

This review paper emphasised on the origin of hexavalent chromium toxicity in tannery wastewater and its remediation using novel Microbial Fuel Cell (MFC) technology, including electroactive bacteria, which are known as exoelectrogens, to simultaneously treat wastewater and its action in the production of bioenergy and the mechanism of Cr6+ reduction. Also, there are various parameters like electrode, pH, mode of operation, time of operation, and type of exchange membrane used for promising results shown in enhancing MFC production and remediation of Cr6+. Destructive anthropological activities, such as leather making and electroplating industries are key sources of hexavalent chromium contamination in aquatic repositories. When Cr6+ enters the food chain and enters the human body, it has the potential to cause cancer. MFC is a green innovation that generates energy economically through the reduction of toxic Cr6+ to less toxic Cr3+. The organic substrates utilized at the anode of MFC act as electrons (e-) donors. This review also highlighted the utilization of cheap substrates to make MFCs more economically suitable and the energy production at minimum cost.

Integrated Biorefinery and Life Cycle Assessment of Cassava Processing Residue-From Production to Sustainable Evaluation.

Commonly known as a subsistence culture, cassava came to be considered a commodity and key to adding value. However, this tuber's processing for starch and flour production is responsible for generating a large amount of waste that causes serious environmental problems. This biomass of varied biochemical composition has excellent potential for producing fuels (biogas, bioethanol, butanol, biohydrogen) and non-energetic products (succinic acid, glucose syrup, lactic acid) via biorefinery. However, there are environmental challenges, leading to uncertainties related to the sustainability of biorefineries. Thus, the provision of information generated in life cycle assessment (LCA) can help reduce bottlenecks found in the productive stages, making production more competitive. Within that, this review concentrates information on the production of value-added products, the environmental impact generated, and the sustainability of biorefineries.

A critical review on biomass-based sustainable biorefineries using nanobiocatalysts: Opportunities, challenges, and future perspectives.

Biocatalysts, including live microbial cells/enzymes, have been considered a predominant and advantageous tool for effectively transforming biomass into biofuels and valued biochemicals. However, high production costs, separation, and reusability limit its practical application. Immobilization of single and multi-enzymes by employing different nano-supports have gained massive attention because of its elevated exterior domain and high enzymatic performance. Application of nanobiocatalyst can overcome the drawbacks mainly, stability and reusability, thus reflecting the importance of biomass-based biorefinery to make it profitable and sustainable. This review provides an in-depth, comprehensive analysis of nanobiocatalysts systems concerning nano supports and biocatalytic performance characteristics. Furthermore, the effects of nanobiocatalyst on waste biomass to biofuel and valued bioproducts in the biorefinery approach and their critical assessment are discussed. Lastly, this review elaborates commercialization and market outlooks of the bioconversion process using nanobiocatalyst, followed by different strategies to overcome the limitations and future research directions on nanobiocatalytic-based industrial bioprocesses.

Potential of eggshell waste derived calcium for sustainable production of biogas from cassava wastewater.

Cassava is a staple crop that plays a significant role in the food security of many countries. However, its processing produces a liquid by-product known as cassava wastewater (CW), which can have adverse environmental consequences if discarded without treatment. Despite its cyanide content, CW has a high organic content and may be profitable when used to produce biogas. In this study, the influence of calcium particles from eggshell residues was investigated on the anaerobic digestion of CW. Moreover, the performance of the bioreactor was remotely monitored. Calcium particles from milled-calcined chicken eggshells were added to the bioreactor, and biogas production was investigated for 21 days. Adding 1 g/L and 3 g/L of calcium particles increased biogas (Bio H2 + Bio CH4) production by 195% and 338%, respectively. Finally, the requirement for digestate post-treatment before use in agriculture was observed after assessing its phytotoxicity through the germination and root growth of L. sativa seeds.

A systematic review on potential microbial carbohydrases: current and future perspectives.

Various studies have shown that the microbial proteins are often more stable than belongs to other sources like plant and animal origin. Hence, the interest in microbial enzymes has gained much attention due to many potential applications like bioenergy, biofuel production, biobleaching, bioconversion and so on. Additionally, recent trends revealed that the interest in isolating novel microbes from harsh environments have been the main focus of many scientists for various applications. Basically, industrially important enzymes can be categorized into mainly three groups: carbohydrases, proteases, and lipases. Among those, the enzymes especially carbohydrases involved in production of sugars. Carbohydrases include amylases, xylanases, pectinases, cellulases, chitinases, mannases, laccases, ligninases, lactase, glucanase, and glucose oxidase. Thus, here, an approach has been made to highlight five enzymes namely amylase, cellulase, laccase, pectinase, and xylanase from different sources with special emphasis on their properties, mechanism, applications, production optimization, purification, molecular approaches for its enhanced and stable production, and also biotechnological perspectives of its future development. Also, green and sustainable catalytic conversion strategies using nanoparticles of these enzymes have also been discussed. This review will provide insight into the carbohydrases importance and their usefulness that will help to the researchers working in this field.

Transcriptome-wide identification and computational insights into protein modeling and docking of CAMTA transcription factors in Eleusine coracana L (finger millet).

Calmodulin-binding transcription activator (CAMTA) are a group of transcription factors that are known to perform various important biological functions in plants. Here, we report 7 putative CAMTA transcription factors identified from finger millet transcriptome data. They were further analyzed for physicochemical properties, subcellular localization, conserved domains and motifs, Gene Ontology (GO) terms, phylogeny, 3D structure prediction and CAMTA-Ca2+-Calmodulin interaction through protein-protein docking. All EcCAMTAs were found to be localized in the nucleus and possessed a calmodulin binding domain (CaMBD). GO results indicated the involvement of CAMTAs in DNA binding and protein binding molecular functions. Phylogenetic analysis classified EcCAMTA genes into 3-subgroups. 3D-structure of CAMTA proteins was elucidated through ab-initio protein modeling and its interaction with Calmodulin was investigated by docking studies. Our study provides molecular insight into the structure and function of CAMTA genes in finger millet and also highlights the role of omics-based in-silico approaches for identification of novel gene families in the absence of a reference genome or annotated database. This being the first study of CAMTA transcription factor family in finger millet, it could serve as a resource for further studies of CAMTA genes either in finger millet or other related millets and cereal crops.

Detection and identification of hazardous organic pollutants from distillery wastewater by GC-MS analysis and its phytotoxicity and genotoxicity evaluation by using Allium cepa and Cicer arietinum L.

Distillery industry generates a huge amount of wastewater, which contains a high strength of organic and inorganic load. Accordingly, this study aims to analyze the physico-chemical pollution parameters and the occurrence of phytotoxic, cytotoxic and genotoxic pollutants in wastewater. The result revealed that values of wastewater parameters were recorded as 13268 mg l-1 (BOD), 25144 mg l-1 (COD), 25144 mg l-1 (TS), and 6634 mg l-1 (phosphate), while pH was alkaline. The organic compounds detected by GC-MS were quercetin 7,3',4'-trimethoxy, octadecadienoic acid, propanoic acid, glycocholic acid methyl ester, cantaxanthin, etc. The Allium cepa was used for the toxicity test with different concentrations of wastewater showed a significant level of reduction in root growth and length after exposure and the maximum reduction was at 25% and 20%. Phytotoxicity studies were performed using Cicer arietinum L. with different concentrations of wastewater, which showed adverse effects on seed germination, root length, and the effect was associated with the increasing concentration of wastewater. A. cepa root tips were used for the analysis of mitotic index (MI), nuclear abnormalities (NA), and chromosomal aberrations (CA). MI was decreasing significantly from 72% (control) to 33%, 22%, 23%, 21%, and 18% at 5%, 10%, 15%, 20%, and 25% wastewater concentration, respectively. The A. cepa root tip cells showed chromosomal aberrations and nuclear abnormalities like vagrant, stickiness, chromosomal loss, c-mitosis, binucleated, micronuclei, and aberrant cell. This study concluded that the wastewater treatment process is insufficient and the discharged waste needs a proper assessment to know the associated health risk.

Developing Microbial Co-Culture System for Enhanced Polyhydroxyalkanoates (PHA) Production Using Acid Pretreated Lignocellulosic Biomass.

In the growing polymer industry, the interest of researchers is captivated by bioplastics production with biodegradable and biocompatible properties. This study examines the polyhydroxyalkanoates (PHA) production performance of individual Lysinibacillus sp. RGS and Ralstonia eutropha ATCC 17699 and their co-culture by utilizing sugarcane bagasse (SCB) hydrolysates. Initially, acidic (H2SO4) and acidified sodium chlorite pretreatment was employed for the hydrolysis of SCB. The effects of chemical pretreatment on the SCB biomass assembly and its chemical constituents were studied by employing numerous analytical methods. Acidic pretreatment under optimal conditions showed effective delignification (60%) of the SCB biomass, leading to a maximum hydrolysis yield of 74.9 ± 1.65% and a saccharification yield of 569.0 ± 5.65 mg/g of SCB after enzymatic hydrolysis. The resulting SCB enzymatic hydrolysates were harnessed for PHA synthesis using individual microbial culture and their defined co-culture. Co-culture strategy was found to be effective in sugar assimilation, bacterial growth, and PHA production kinetic parameters relative to the individual strains. Furthermore, the effects of increasing acid pretreated SCB hydrolysates (20, 30, and 40 g/L) on cell density and PHA synthesis were studied. The effects of different cost-effective nutrient supplements and volatile fatty acids (VFAs) with acid pretreated SCB hydrolysates on cell growth and PHA production were studied. By employing optimal conditions and supplementation of corn steep liquor (CSL) and spent coffee waste extracted oil (SCGO), the co-culture produced maximum cell growth (DCW: 11.68 and 11.0 g/L), PHA accumulation (76% and 76%), and PHA titer (8.87 and 8.36 g/L), respectively. The findings collectively suggest that the development of a microbial co-culture strategy is a promising route for the efficient production of high-value bioplastics using different agricultural waste biomass.

Lignin-Mediated Silver Nanoparticle Synthesis for Photocatalytic Degradation of Reactive Yellow 4G and In Vitro Assessment of Antioxidant, Antidiabetic, and Antibacterial Activities.

This study explored the potential of abundantly available sodium lignosulfonate (LS) as a reducer and fabricating agent in preparing silver nanoparticles (LS-Ag NPs). The operational conditions were optimized to make the synthesis process simpler, rapid, and eco-friendly. The prepared LS-Ag NPs were analyzed via UV-Vis spectroscopy, X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, and high-resolution transmission electron microscopy. Results demonstrated that LS-Ag NPs were of crystalline structure, capped with LS constituents, and spherical in shape with a size of approximately 20 nm. Under optimized conditions, LS-Ag NPs exhibited significant photocatalytic activity in Reactive Yellow 4G degradation. The effects of photocatalyst (LS-Ag NPs) dosage, dye concentration, and its reusability for dye degradation were studied to make the process practically applicable in textile wastewater treatment. Additionally, the synthesized LS-Ag NPs displayed significant free radical scavenging against 2-diphenyl-1-picrylhydrazyl (DPPH) with an IC50 value of (50.2 ± 0.70 µg/mL) and also exhibited antidiabetic activity in terms of inhibition in the activity of carbohydrate-degrading marker enzyme α-glucosidase with an IC50 value of (58.1 ± 0.65 µg/mL). LS-Ag NPs showed substantial antibacterial potential against pathogenic strains, namely E. coli and S. aureus. In conclusion, LS-Ag NPs can be a reliable and eco-friendly material for their possible application in the treatment of dye-containing wastewater and have a great perspective in the biomedical and pharmaceutical sectors.

An Overview of Recent Advancements in Microbial Polyhydroxyalkanoates (PHA) Production from Dark Fermentation Acidogenic Effluents: A Path to an Integrated Bio-Refinery.

Global energy consumption has been increasing in tandem with economic growth motivating researchers to focus on renewable energy sources. Dark fermentative hydrogen synthesis utilizing various biomass resources is a promising, less costly, and less energy-intensive bioprocess relative to other biohydrogen production routes. The generated acidogenic dark fermentative effluent [e.g., volatile fatty acids (VFAs)] has potential as a reliable and sustainable carbon substrate for polyhydroxyalkanoate (PHA) synthesis. PHA, an important alternative to petrochemical based polymers has attracted interest recently, owing to its biodegradability and biocompatibility. This review illustrates methods for the conversion of acidogenic effluents (VFAs), such as acetate, butyrate, propionate, lactate, valerate, and mixtures of VFAs, into the value-added compound PHA. In addition, the review provides a comprehensive update on research progress of VFAs to PHA conversion and related enhancement techniques including optimization of operational parameters, fermentation strategies, and genetic engineering approaches. Finally, potential bottlenecks and future directions for the conversion of VFAs to PHA are outlined. This review offers insights to researchers on an integrated biorefinery route for sustainable and cost-effective bioplastics production.

Efficient degradation and detoxification of methylene blue dye by a newly isolated ligninolytic enzyme producing bacterium Bacillus albus MW407057.

In present work, a LiP enzyme producing bacterium was isolated form textile wastewater and sludge sample and identified as Bacillus albus by 16S rRNA gene sequencing analysis. This bacterium decolorized 99.27 % MB dye and removed 83.87 % COD within 6 h at 30 °C, pH 7, 100 rpm and 100 mg/l of dye concentration in presence of glucose and yeast extract as carbon and nitrogen source, respectively. The bacterium also produced LiP enzyme of molecular weight ∼48 kDa, characterized by SDS-PAGE analysis. Different metabolites like monomethylthionine, thionin, (E)-2-(3-Oxopropylidene)-2H-benzo[b][1,4] thiozine-3-carboxylic acid, N-(3,4-dihydroxyphenyl)-N-methylformamide, ethylamine, water and carbon dioxide produced during treatment process were characterized by FT-IR and LC-MS analysis. Further, the toxicity assessment results showed that the toxicity of bacteria treated dye solution was reduced significantly allowing 90 % seed germination indicating that the isolated bacterium B. albus has high potential to decolorize and detoxify MB dye for environmental safety.

Cellulose-deconstruction potential of nano-biocatalytic systems: A strategic drive from designing to sustainable applications of immobilized cellulases.

Nanostructured materials along with an added value of polymers-based support carriers have gained high interest and considered ideal for enzyme immobilization. The recently emerged nanoscience interface in the form of nanostructured materials combined with immobilized-enzyme-based bio-catalysis has now become research and development frontiers in advance and applied bio-catalysis engineering. With the involvement of nanoscience, various polymers have been thoroughly developed and exploited to nanostructured engineer constructs as ideal support carriers/matrices. Such nanotechnologically engineered support carriers/matrix possesses unique structural, physicochemical, and functional attributes which equilibrate principal factors and strengthen the biocatalysts efficacy for multipurpose applications. In addition, nano-supported catalysts are potential alternatives that can outstrip several limitations of conventional biocatalysts, such as reduced catalytic efficacy and turnover, low mass transfer efficiency, instability during the reaction, and most importantly, partial, or complete inhibition/deactivation. In this context, engineering robust and highly efficient biocatalysts is an industrially relevant prerequisite. This review comprehensively covered various biopolymers and nanostructured materials, including silica, hybrid nanoflower, nanotubes or nanofibers, nanomembranes, graphene oxide nanoparticles, metal-oxide frameworks, and magnetic nanoparticles as robust matrices for cellulase immobilization. The work is further enriched by spotlighting applied and industrially relevant considerations of nano-immobilized cellulases. For instance, owing to the cellulose-deconstruction features of nano-immobilized cellulases, the applications like lignocellulosic biomass conversion into industrially useful products or biofuels, improved paper sheet density and pulp beat in paper and pulp industry, fruit juice clarification in food industry are evident examples of cellulases, thereof are discussed in this work.

Efficient bioconversion of sugarcane bagasse into polyhydroxybutyrate (PHB) by Lysinibacillus sp. and its characterization.

In this study, Lysinibacillus sp. RGS was evaluated to synthesize polyhydroxybutyrate (PHB) from a broad range of pure carbon sources and residual sugars of chemically pretreated sugarcane bagasse (SCB) hydrolysates. Effects of supplementation of nutrients and various experimental variables to enhance PHB accumulation were investigated. Results of optimized parameters were identified as 48 h, 37 °C, pH 7; inoculums concentration (2.5% v/v) and shaking condition (100 rpm). Growth kinetics and bioprocess parameters of Lysinibacillus sp. using SCB hydrolysates with corn steep liquor (2%) accounted for the maximum cell growth (8.65 g/L) and PHA accumulation (61.5%) with PHB titer of (5.31 g/L) under optimal conditions. The produced biopolymer was studied by Fourier Transform Infrared (FTIR) spectroscopy and the results revealed the obtained to be PHB. Thus Lysinibaciluus sp. exhibits high potential in industrial scale manufacture of PHB using SCB as an inexpensive substrate.

Utilization of Noxious Weed Water Hyacinth Biomass as a Potential Feedstock for Biopolymers Production: A Novel Approach.

This study aims to utilize a noxious weed water hyacinth biomass (WH) for polyhydroxybutyrate (PHB) production. Alkaline and peracetic acid pretreatment was employed for the hydrolysis of WH and consequently enzymatic saccharification to produce fermentable sugars for PHB production. The pretreatment competence was determined using various operational parameters. By applying ambient conditions, alkaline pretreatment gave higher lignin removal of 65.0%, with 80.8% hydrolysis yield, and on enzyme hydrolysis (40 FPU/g of dry WH), produced total reducing sugar of about 523 mg/g of WH. The resulted WH enzymatic hydolysates were evaluated for the production of PHB by Ralstonia eutropha (ATCC 17699). The WH hydrolysates cultivation was compared to synthetic hydrolysates that contain a similar carbon composition in terms of bacterial growth and PHB synthesis. The effects of various supplements to enhance PHB production were estimated. Supplementation of corn steep liquor (CSL) as a cheap nitrogen source with WH hydrolysates favored a higher amount of PHB synthesis (73%), PHB titer of 7.30 g/L and PHB yield of 0.429 g/g of reducing sugar. Finally, using standard analytical tools, the physical and thermal characteristics of the extracted PHB were evaluated. The findings revealed WH was a promising and technically feasible option for transforming biomass into sustainable biopolymer conversion on a large scale.

Bacterial degradation of distillery wastewater pollutants and their metabolites characterization and its toxicity evaluation by using Caenorhabditis elegans as terrestrial test models.

Distillery wastewater has significant amount of coloring compounds and organic substances even after the secondary treatment process, which poses many severe environmental and health threats. However, the recalcitrant coloured compounds have not yet been clearly identified. In this study, two bacterial strains DS3 and DS5 capable to decolorize distillery wastewater (DWW) pollutants were isolated and characterized as Staphylococcus saprophyticus (MF182113) and Alcaligenaceae sp. (MF182114), respectively. Results showed that mixed bacterial culture was found more effective decolorizing 71.83% DWW compared to axenic culture DS3 and DS5 resulting only 47.94% and 50.67% decolorization, respectively. The FT-IR and LC-MS/MS analysis of untreated DWW showed the presence of many recalcitrant compounds having different functional groups, but after bacterial treatment, most of compounds get diminished and the toxicity of DWW was reduced significantly. Further, the Nile red staining of Caenorhabditis elegans exposed to untreated and bacteria treated DWW for evaluation of toxicity assay and results revealed that the worms exposed to untreated DWW showed sharp reduction in total fat content having more profound effects, suggesting the diminished nAchR signaling as compare to bacterial treated DWW. Hence, this study revealed that inadequate disposal of untreated DWW may cause transfer of toxic substances into the environment and receiving water bodies.

Fungal biosynthesis of lignin-modifying enzymes from pulp wash and Luffa cylindrica for azo dye RB5 biodecolorization using modeling by response surface methodology and artificial neural network.

This study demonstrates the evaluation between the artificial neural network technique coupled to the genetic algorithm (ANN-GA) and the response surface methodology (RSM) for prediction of Reactive Black 5 (RB5) decolorization by crude enzyme from Pleurotus. sajor-caju. Fungal lignin-modifying enzymes (FLME) were synthesized using pulp wash (PW) as an inducing substrate, and L. cylindrica (L.C) for cell immobilization. When grown in PW, the fungus showed higher Lac activity (126.5 IU. mL-1), whereas when immobilized a higher MnP activity was achieved (22.79 IU. mL-1), but both methods were capable of decolorizing the dye in about 89.4 % and 75 %, respectively. This indicates applicability of PW as an alternative substrate for FLME induction and viability of immobilization for MnP synthesis. For RB5 decolorization, the action of the crude enzyme extract was considered as a function of pH, dye concentration, temperature, and reaction time. The models are well adjusted to predict the efficiency of biodecolorization, with no statistical difference between ANN-GA and RSM, which indicates potential for green enzymes prospecting application in bioprocess industry.